1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 336Get this manual
34Throughly clean aft support flange bore area of gearcase and aft support flange of bearing housing [llJ
35Lightly apply ONIC Triple-Guard grease to new a-rings, and install them on the bearing housingCarefully apply ONIC Gasket Sealing Compound to front housing flange Apply RTV sealant to aft flange
36Vertically align the propeller shaft housing screw holes and position the anode downwardInsert the housing assembly until it seatsHold the driveshaft and rotate the propeller shaft to engage the internal splines of the two propeller shaftsPush the housing in by hand until the retaining tab slots are flush with those in the gearcase housing