1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 324Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 324

Forward Gear, Propeller Shaft, and Bearing Housing Servicing
1Remove and discard the bearing housing O-rings2Remove the anode and discard it if it's more than V3 deterioratedClamp the bearing housing by the anode bosses in vise as shown3Remove the forward gear assembly by unscrewing it with

ave Spanner, PIN 432400 (V6) or PIN 432399 (V8)INote V8The forward gear assembly is serviced as an assem-

rn 5Remove the shim from either the flange or forward gear
blyDo not attempt to disassemble it4Remove the set screws and remove the flangeW

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269