1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 316Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 316

34Fill the gearcase with lubricant as follows: Secure the gearcase in an upright position Remove the oil level plug and the drainfill plugReplace their seals, if damaged Fill the gearcase with OMC Ultra-HPF gearcase lube until it appears at the oil level holeInstall the oil level plug, then the drainfill plugTighten them to 84-86 inIbs(9-10 Nm) Check the oil level after the motor has been run

35Adjust the shift rod as follows:

Check from the shift rod hole to the surface of the gearcase with OMC Universal Shift Rod Height Gauge, PIN 389997With the shift rod in NEUTRAL and the offset facing forward, rotate the shift rod full turns up or down, as necessary, for correct adjustmentSHIFT ROD HEIGHTS

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269