1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 296Get this manual
24 44186
1241 1251
29Oil, then install the thrust bearing and large thrust washer on the hub of the reverse gear30Apply OMC Needle Bearing Assembly Grease to the small thrust washer Place the small thrust washer in recess of reverse gearSlide the reverse gear onto the propeller shaft until it engages the pinion
31Carefully apply OMC Gasket Sealing Compound to the forward a-ring flange of the bearing housing Do not allow sealer to contact either forward thrust surface or bearings in the housing32Thoroughly clean aft support flange bore area of gearcase and aft support flange of the bearing housingApply RTV sealer to aft support flange of bearing housing33Install the housing in the gearcase with screw holes in vertical position and anode facing downPress the bearing housing into the gearcase and tap the housing with soft face mallet to seat the a-ring