1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 292Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 292

Assembly
INote Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection
rnRemover and the following componentsshown: Pinion Bear1Assemble of OMC Installer, PIN 391257, as ing
114-20 V2 inHex Head Screw in0.0Flat Washer PIN 326584 Spacer PIN 3265741nstallerRemover PIN 326587 Washer (V16 inx 1314 in0.0 PIN 391260 Plate and Bearing PIN 326582 Rod 114-20 1114 inHex Head Screw

2Apply OMC Needle Bearing Assembly Grease to the 18 needle bearings and insert them into the bearing case3Place the bearing on the installer tool with the lettered side of the bearing facing the top of the gearcaseUse CIVIC Needle Bearing Assembly Grease to hold the bearing on the tool
INote Incorrect installation of the pinion bearing in the gearcase

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269