1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 288Get this manual
Propeller Shaft Bearing Housing Service
1Remove the seal using CWIC Puller Bridge, PIN 432127, and CWIC Small Puller Jaws, PIN 432131Position the plate on top of the housing to support the bridge, and tighten the jaws securely behind the seal
INotellnspect bearings in placeIf bearing is removed for any reason, it must be discarded2Remove either bearing using CWIC Puller Bridge, PIN 432127, and CWIC Large Puller Jaws, PIN 432129Rest the puller plate on top of the housing to support the bridge, and tighten the jaws securely behind the bearing
rn bearings in the bearing housing O-rings.IfClean the were not 3Discard housing solvent, and dry thoroughlybearings and
replaced, rotate the needles with your fingers to check for freedom of movement ,