1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 269Get this manual
6Install the adapter housing on the outer exhaust housingAlign the water tube
7Loosely install the small retaining screws
8Lubricate the upper mount with soapy water and push into place in the adapter housingThe mount radius must face aft and the "TOP" mark must face up
9Apply Locquic Primer and ONIC Nut Lock to the upper mount plate screws and install the plate and screws looselyInstall the ground lead and star washer under the forward starboard screw
10Align the outer exhaust housing and adapter by placing powerhead mounting screws through their holes
11Torque the mount plate screws to 22-24 ftIbs(30-33 Nm)