1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 204Get this manual
20Using an appropriate bearing separator, support the lower bearing and press it off the crankshaft
If the lower main bearing is removed from the crankshaft, it must be discardedDo not reuse it21To remove the upper crankshaft seal, use drift punch as shownRemove and discard crankcase head O-rings22Remove crankcase seal rings for inspection
1221 1231
23Remove center main bearings and split sleeves for inspection24Using an appropriate ring expander, remove all piston rings from pistonsDiscard the rings
25Using tool as drawn on Page 4-6, orOMC Retaining Ring Pliers, PIN 325937, remove all wrist pin retaining ringsDiscard retaining rings26Support pistons in OMC Piston Cradle, PIN 326572, and remove wrist pins with OMC Driver, PIN 396747