1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 190Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 190

STEPRUNNING OUTPUT TEST
1Twist and remove all primary leads from ignition coils

2Use clockwise twist to install terminal extenders, Stevens NoTS-77 or equivalent, on ignition coil primary posts3Install primary leads on terminal extendersObserve proper wire routing
1Note Route all tester leads so they do not interfere with moving engine parts
4Set peak-reading voltmeter to "POS" and "500"

5Connect voltmeter red lead to No.1 terminal extenderConnect meter black lead to clean engine ground

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269