1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 184Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 184

Ohmmeter TestStop Button

All ohmmeter tests must be performed with engine NOT running
1Separate the 1-pin connector between the stop button and the power pack2Calibrate ohmmeter on appropriate scaleConnect the meter red lead to the terminal in stop button end of the connector and the meter black lead to clean engine ground Button depressed, meter must show low reading Button not depressed, meter must show high reading 3If engine fails to shut off, test for open blackyellow lead from power pack or open black lead from stop button4Complete all circuits disconnected during this test

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269