1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 162Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 162

7 DRC6147

Ohmmeter TestDiode and Connectors

All ohmmeter tests must be performed with the engine NOT running
1Calibrate ohmmeter on appropriate scale

2Disconnect engine wiring harness connector and 2-pin Amphenol connector between power pack and key switch, and 1-pin Amphenol connector between engine harness and shift switch

3Connect ohmmeter red lead to blackyellow terminal in engine harness connector Connect black meter lead to blackorange terminal "A" in 2-pin Amphenol connectorNote reading
4Reverse meter connections or press "polarity" buttonNote reading: high reading in one direction and low reading in the other direction indicates diode is good If your test results are different, replace diode or repairreplace engine wiring harness

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269