1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 143Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 143

22 in(56 em)
DRC6251

Blocking Diode Test
[] The diode is located in the engine harness tan wire circuit at position 1Disconnect engine harness 6-pin Deutsch connector that contains the tan wire2Disconnect temperature switch tan lead
rn 3connect meter betweenappropriate scaletan lead and Calibrate ohmmeter on Using jumper wires, engine harness
engine harness 6-pin connector terminal "6"Note reading4Reverse meter connections or press "polarity" buttonNote reading very high reading (00) in one direction and low reading in the other direction indicates diode is good5Replace engine harness blocking diode if your test results vary6Complete all circuits disconnected during this test

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269