1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 138Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 138

Power Pack Servicing Removal

& Twist and remove all spark plug leads to avoid accidental

starting while servicing engine
1Remove two nutstwo washers, and two screwspower pack to bracket2Lift the power pack away from the component bracket
3Disconnect power pack leads Charge coil leads Timer base leads Key switch lead(s) Yellowred lead Tan lead(s) Whiteblack lead Orange and orangeblack leads Ignition coils primary leads

Installation

1Carefully route power pack leads under component bracket and put power pack in place2Lubricate all Amphenol connectors with isopropyl alcohol, align flats, and connect them3Place first the charge coil connector(s) and then the timer base connectors in the component bracket

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269