1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 106Get this manual

1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 106

11Install new O-ring seal, and attach main body to throttle bodyTorque mounting screws in "x" pattern to 45-55 inIbs(5-6 Nm)
INotel When positioning main body, be careful not to roll O-ring seal out of positionInstallation

1Install new carburetor base gaskets dry; use no sealer2Carefully, install fuel hosesRefer to Hose Routing Chart, this sectionSecure all hoses with tie straps
1251 1261

3Position carburetor and engage throttle shaft connector link{s)
"x" pattern to

4Install nuts and screws per carburetor, and tighten in 120-144 inIbs(14-16 Nm)

Back to 1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269