1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 100Get this manual
With lever in run positionno fluid should enter inlet fittingWith lever in prime positionfluid should come out both outlet fittings
3To inspect or replace internal components, remove the four solenoid cover screws4When assembling solenoid, back out screws in their holes to engage original threadsthen, tighten securelyInstallation
1Attach purplewhite leads and hosesSecure large hose with tie strap2Install solenoid and bracketPosition ground lead under the inside bracket screw3Install the pumpPosition the vacuum switch ground lead and star washer under the pump bracket screw
4Check for leaks by connecting fuel tank hose to motor and squeezing primer bulb until definite pressure is felt in the bulb
Fuel Enrichment Switch Servicing Function Test