1997 Johnson Evinrude "EU" 125C, 130, 200, 225, 250 90 LV Service Manual, P/N 507269, Page 29Get this manual
New Engine Pre-Delivery Checks The careful preparation of an engine before delivery will ensure owner satisfactionOMC
OWNER IDENTIFICATION CARD
uncrating new engine, inspect itIf you find: Shipping damagecontact the carrier that delivered it Parts or connections are looserepair as required Parts are missingcontact OMC
Owner'Name
Date of Purchase
2Before connecting the instrument harness to the outboard, verify operation of the OMC System Check T" engine monitor and other dash panel functions as described in Section 7, Circuit Verification, ONIC Tester, PIN 4372743Verify oil tank is installed in relatively dry locationThe tank must not be exposed to constant rain or water spray4Install the outboard following procedures outlined in the Installation Guidelines5Check gearcase lubricant levelFill to oil level hole6On power steering-equipped engines, remove the reservoir dipstick and wait five minutesCheck fluid levelInstall dipstickRecheck the level after running engine five minutesS 0
ow"'sName
DEALER RECORD CARD