1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 307Get this manual

1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 307

o o37152 37153

[]J INote Before

disassembly, scribe marks on frame and end caps for reference during reassembly6Remove the two thru-bolts and separate components
Assembly

1Lubricate the armature shaft bearing surface with one drop of SAE No10 oilLubricate pinion helix on armature shaft with OMC
Starter Pinion Lube

[]] 2If removed, install thrust washer on drive end of armature shaft[]] 3Assemble drive end cap to drive end of armature shaft[]] 4Assemble armature to frame and magnet assembly aligning marks on drive cap end and frame

5Install insulated brush and terminal set in commutator end cap with long lead in slotPosition the insulators and nut as shown in figure

Back to 1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262