1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 272Get this manual
1m 17 Inspect the driveshaft bearing in placeIf necessary, remove the bearing and sleeve using the slide hammer and ClVIC Two-Jaw Puller, PIN 391012The jaws of the puller must be reversed so the jaw tips are facing inwardUse stiff rubber band to keep the jaws together18Inspect the pinion bearings in placeIf necessary, remove the bearings using OMC Bearing Remover, PIN 319880Place shop cloth inside the gearcase to catch the bearings and toolIf pinion bearings are removed for any reason, they must be replaced19Temporarily install the gearcase head into the gearcase with the two screws, finger tightUsing ClVIC Small Puller Assembly, PIN 432131, remove propeller shaft seal