1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 184Get this manual

1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 184

Valve Lash Adjustment
INote Motor

must be cold to adjust valve lashValve lash adjustment must be made with motor in timed position as described in Timing Procedure, this section
[]] 1Set tappets for No.1 piston using OJVK:: Tappet Adjustment Tool, PIN 341444, and feeler gauge: Intake (upper rocker)0.003 in(0,08 mm) Exhaust (lower rocker)0.005 in(0,12 mm) Torque tappet nuts to 10-20 inIbs(1,1-2,3 Nm)2Rotate crankshaft pulley clockwise one revolution (360)This will rotate camshaft pulley one-half revolution (180) so the pointer faces opposite the extrusion on the manual starter boss3Set tappets for No.2 piston in same fashion to the same specifications as No.1 piston
W 4Apply OJVK:: Triple-Guard grease to new a-ring seal and

Back to 1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262