1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 101Get this manual
Packard Connector Servicing Terminal Removal
A tab on the back side of the terminal engages shoulder in the connector's body to hold the terminal in place
m 3.terminalatotool, such as one shown, into the connector Insert push the tab down above the4Push the tool and wire out of the connectorTerminal Installation
1Pry seal out of connector2Slightly pull on wire to move tab away from shoulder
The terminal must be pulled into the connector to lock it in placeBefore installing new terminal on wire, insert the wire through the seal and connector]] 1The tab on the terminal must extend enough to lock the terminal in place inside the connectorIf the tab isn't extended, use th in tool and bend it outward slightly2Pull terminal into connector3Push seal into connector until seated