1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 79Get this manual
11Place the lower gasket into the float chamberInstall the float chamber and bowl gasketTighten the screws to torque of 8-10 inIbs(0,8-1,2 Nm), following sequence embossed on float chamber12Install the carburetor body cover and gasketTighten the screws to torque of 8-10 inIbs(0,8-1,2 Nm), following sequence embossed on cover13Install the idle mixture needle and springTurn needle carefully until it lightly contacts the seat; then back it off: 56turns Installation9.915 (305cc) 1Position new gasket on either side of the insulator and install on the intake manifold [lID
2Install the carburetorTighten two retaining nuts securely
I1ID 31201
Install the choke cable in link and attach to powerhead with clampTorque to 60-84 inIbs(7-9 Nm)Attach hoses to carburetor nipples and secure with tie straps4Install the air horn cover and tighten screws securely