1997 "EU" Johnson Evinrude 5 thru 15 Four Stroke Service Manual, P/N 507262, Page 70Get this manual
2To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms
3To test solenoid valve and seat:
rn Lightly pressurize inlet fitting with alcohol and syringe[!] [!]
With lever in run positionno fluid should enter inlet fittingWith lever in prime positionfluid should come out both outlet fittings
rn solenoid coverorscrewsinternal components, remove the 4To inspect replace four
5When assembling solenoid, back out screws in their holes to engage original threadsthen, tighten securelyInstallation