1996 Johnson/Evinrude Outboards 8 thru 15 Four-Stroke Service Manual, Page 264Get this manual
2Remove the positive connection (red) for the battery cable and engine wiring harness at the solenoid
[]] 3Remove the yellowred and black wires from the top of the
solenoidRemove the wire from the pressure switchIf equipped, remove bullet connectors from temperature switch and primer
4Disconnect the two Amphenol and three bullet connectors from the engine wiring harnessunder flywheel, remove the two remaining screws and starter
[]] 5Disconnect starter cable from solenoidLoosen the screw
rn 6Remove screws retaining the solenoidRemove solenoid[IQ]
7Remove screws retaining rectifierregulator and bracketRemove rectifierregulator and bracketInstallation