1996 Johnson/Evinrude Outboards 8 thru 15 Four-Stroke Service Manual, Page 245Get this manual
Starter Circuit CheckRemote
INote Battery must be fully chargedStep Procedure Remove black lead from ground at CDConnect voltmeter between CD and common engine groundTurn key to START positionVoltmeter should show battery voltageConnect meter at 0Turn key to START positionResult aIf no reading, go to Step
D Check voltage between ground and CD& Steps II thru IIRemove
starter to solenoid cable from ment while making checks
bIf meter reads battery voltage, reconnect black lead to ground and go to Step
(j) to prevent starter engage-
II Check voltage between ground
INote Steps II thru IITurn
aIf meter reads battery voltage, lead is open between CD and
key OFF before connecting and disconnecting meterTurn key to START position after connectingConnect meter at Turn key to START positionbIf no reading, go to Step