1996 Johnson/Evinrude Outboards 8 thru 15 Four-Stroke Service Manual, Page 236Get this manual
[]] 6Using sharp, hooked pin, thread rope through rope guide, down through pulley rim, and up through rope channel to anchor pointKnot rope and pull knot into anchor point7Remove tool and let spring slowly wind rope onto pulley Disassembly
& Wear safety glasses to protect your eyes while disassembling and reassembling manual starter1Remove ropeRefer to Starter Rope Replacement[]] 2Let pulley slowly unwind until all tension is off the springRemove the E-ring, and lift pawl and links off
3Remove the starter spindle screw and locknutHold the pulley down in housing and lift out spindleCarefully lift out pulley, leaving spring in housingnot remove spring with spring turned upDo not lift spring out of housing by hand or with pliersSpring is under tension and will cause injury if accidentally released