1996 Johnson/Evinrude Outboards 8 thru 15 Four-Stroke Service Manual, Page 176Get this manual
17Apply CIVIC Gasket Sealing Compound to casing of new upper crankshaft seal, and oil to the seal lips1Note When starting seal over the crankshaft, be sure the lips fit
properly and the seal is square in the bore18Remove keys from the crankshaft and place the seal, casing up, on the crankshaft
19Use CIVIC Upper Crankshaft Seal Installer, PIN 342661, and the crankshaft pulley nut to press seal into placeTurn nut until installer contacts the powerhead
20Apply CIVIC Gasket Sealing Compound to casing of new lower crankshaft seal, and oil to the lipsPlace the seal, casing up, on the crankshaft
21 Use CIVIC Lower Crankshaft Seal Installer, PIN 342215, and hammer to tap the seal into placeTap until installer contacts the powerhead22Install new O-rings on cylinder block dowel pins42223
11s123Apply CIVIC Gasket Sealing Compound to both sides of a