1996 Johnson/Evinrude Outboards 8 thru 15 Four-Stroke Service Manual, Page 70Get this manual
2If check valve assembly is in pieces or new assembly is required: Install poppet housing into spring Insert ball onto poppet housing Install assembled parts into housing then install support clip into housingMake sure support is secured in housing Install seal onto housing
3Install assembly into carburetor
INote [TI]
Install the retainer with the flat side against the check valve assemblyInstall the diaphragm so the outer rib fits in the cover groove
4Press the air vent in the carburetor body
5Install the high-speed orifice
[[] []] 6Install the gasket Q) and valve seat
[]] []] 7Install the hinge pin
and float valve
8Check for correct positioning of the float levelThe float level