1996 Johnson/Evinrude Outboards 8 thru 15 Four-Stroke Service Manual, Page 65Get this manual
2To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms
3To test solenoid valve and seat:
rn Lightly pressurize inlet fitting with alcohol and syringe[IJ [IJ
With lever in run position fitting
, no fluid
should enter inlet
With lever in prime position both outlet fittings
, fluid should come out
[] 4To inspect or replace internal components, remove the four solenoid cover screws