1996 Johnson/Evinrude Outboards 50 thru 70 3-Cylinder Service Manual, Page 248Get this manual
High Voltage
In some conditions, the key switch may be shorting (allowing some leakage) to the other terminals in the key switchbut will not show up with test light or an ohmmeterThis condition may be found by using condenser tester (leakage test) where voltage of approximately 500 volts is applied to the key switch terminalsWith all leads disconnected and the key switch in the "OFF" position, connect the black lead of the tester to one of the "M" terminals of the key switch1Attach the red lead apply leakage test