1996 Johnson/Evinrude Outboards 50 thru 70 3-Cylinder Service Manual, Page 202Get this manual
7Puttie straps on braided tube ends and attach stop switch assembly to outer handle8Install the idle adjustment knob into the inner handleTab goes into recess in inner handle9Push the throttle cable pin through the end ofthe throttle cable10Lubricate end of the pin, guides, rollers, helix grooves, and inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and place the pin into slots of the inner handlePlace the rollers on ends of the roller pin11Assemble the helix halves on the handle and slide the grip over the helixBe sure the speed indicator is positioned with the speed range not 1800 outSnap the grip into placeInstallation
1Insert the stop button leads and throttle cable through the lower engine cover grommet2Apply OMC Triple-Guard grease to the two steering handle bushingsPlace the bushings into the steering bracketAttach the steering handle to the bracket&