1996 Johnson/Evinrude Outboards 50 thru 70 3-Cylinder Service Manual, Page 199Get this manual
Twist-Grip Throttle Servicing Removal
1To avoid accidental starting of engine while servicing, twist and remove all spark plug leads2Remove the pivot connectorthrottle cable bracketand jam nut from the throttle cable3Disconnect the 5-pin Amphenol connector
4Using OMC Pin Removal Tool, PI 322698, remove the blackl yellow wire, terminal "E" from the plug
5Remove the stop button ground lead from the powerhead
W 6Remove the steering handle screw and nutLift the handle
from the steering bracketPull the throttle cable and stop button wires from the grommet in the lower engine coverDisassembly