1996 Johnson/Evinrude Outboards 50 thru 70 3-Cylinder Service Manual, Page 195Get this manual
1191 6Route the trim sender wires through the braided tube and install the sender unit in the port stern bracket1201 out Coat the seals' outside surface with OMC Gasket Sealing Compound Coat the bushings and seal lips with OMC Triple-Guard grease30761
7Install the upper and lower steering shaft bushings and new seals in the swivel bracketBoth seal lips face
1221 8removed,tube bushingsin theOMC Triple-Guard grease and, .Coat tilt install them with swivel bracketif 12311241 9Place the the anodeInstall the tilt tube using the swivel bracket between the stern brackets and install