1996 Johnson/Evinrude Outboards 50 thru 70 3-Cylinder Service Manual, Page 193Get this manual
'8l 7Thread the adapter from OMC Steering Tube Service Kit, PIN 434523, onto the port end of the tilt tubeThread OMC Slide Hammer, PIN 432128, into the adapter until at least in(51 mm) of thread are engagedPull the tilt tube from the stern brackets [!] 8Remove the two tilt tube washersGEJ 9Remove the anodef111 10Remove the swivel bracketInspect and, if necessary, replace the tilt tube bushingsf12l 11Remove the trim sender unit from the port stern bracket and pull its wires through the braided tube