1996 Johnson/Evinrude Outboards 50 thru 70 3-Cylinder Service Manual, Page 190Get this manual
6Lubricate and place the bushings in the swivel bracket 1221 Place the swivel bracket in the stern bracketsLu bricate I:A
8TTL ModelsInsert the tilt tube through the stern and
and place the thrust washer between the stern brackets and swivel bracket
ill swivel bracketsTighten the tilt tube nut to torque of 50-54
ftIbs(68-73 Nm)Then, back off nut torque to turn after applying
bracket and thrust washer into the swivel bracket centerInstall the steering friction handle guard on the tilt bolt with the lip upPush the tilt bolt through the port side of the swivel bracket, thrust washer, and stern bracketInstall the other washer and the nutTorque the nut to 14-16 ftIbs(19-22 Nm)
ill tilt boltsInsert the tilt bolt through the starboard stern
9Manual Tilt ModelsPlace one tilt bolt washer on the
1231 10Install the shock absorber upper pin through the swivel