1996 Johnson/Evinrude Outboards 50 thru 70 3-Cylinder Service Manual, Page 76Get this manual
Disassembly All screws addressed in this procedure are No 15 Torx ill when removing screws and releasing that pressure
"" The air motor cover is under spring pressureUse caution
rv With No15 Torx screwdriver,control the spring pressure, remove the Torx screws holding the air motor coverTo
place pump on your bench with the air motor cover facing upward Hold down on cover while removing screwsSet cover, screws, O-ringand two springs aside
t=J intermediate housing and separate these partsAs you lift the
inlet housing, the oil piston will be drawn out of the oil pump
Remove the Torx screws attaching the inlet housing to the