1996 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 224Get this manual

1996 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 224

9Check the operation of the pawlThe pawl should extend when the starter rope is pulled and retract when the starter rope rewinds
10Install the low oil light and secure with two screws Secure the lead with the two clips on the port side of the starter housing11Reinstall plungerspringtappet CD, and cam Q)Make sure offset side of cam faces the retaining plate underneath housingSecure with retaining pin

Installation

1Position starter on motorConnect starter lockout link to