1996 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 221Get this manual
Starter Servicing Removal
1Avoid accidental starting of engine while servicing; twist and remove all spark plug leads2Disconnect low oil lead two-pin connector from engine harness3Remove the three starter retaining screws and washers link from lockout camLift starter from
rn 4Remove powerheadDisassembly
1To service lockout assembly, remove the retaining pin
[}] 2Remove the plunger, spring, tappet, and cam from the housing[3Remove two screws securing low oil lightUnclip the lead from the starter housing then remove the light assembly