1996 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 191Get this manual
W13Apply light coat of ow::; Triple-Guard grease to thrust washer and place it on the lower end of the steering armPlace the lower motor mount bracket onto the steering arm and align the mounting bolt holes14Apply ewe Nut Lock to the threaded ends of the two mounting bolts Install the two bolts, four flat washers, and two lock nuts in the lower motor mount bracketTighten the bolts and lock nuts to 180-204 inIbs(20-23 Nm)15Install the exhaust housing as described in this section16Install the gearcase as described in Section 617Install the powerhead as described in Section 4 5-20