1996 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 190Get this manual
rn 8.lower bushingTriple-Guard grease tothe bottom of theoutside Apply ONK: the inside and of the CD and install it into swivel bracket[] 9Apply ONK: Gasket Sealing Compound to the outside case of new lower seal Q) Use suitable tool and drive the seal into place until flush with the outside surfaceApply ONK: Triple-Guard grease to the seal lips
10Apply ONK: Triple-Guard grease to the inside and outside surfaces ofthe friction block or upper bushing If equipped with friction screw, install the block with the metal plug facing toward the steering friction Tighten the friction screw, if equipped, just enough to keep the block in placeOvertightening the friction screw will make installing the steering arm assembly difficult11Apply ONK: Gasket Sealing Compound to the outside case of new upper seal Use suitable tool and drive the seal into place until flush with the outside surfaceApply ONK: TripleGuard grease to the seal lips