1996 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 147Get this manual
33Secure restraining jaw "G" and forcing jaw "H" to
34Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm) 35Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
W Position frame onto the connecting rod so the contact
area of the jaw is centered in the side of the rod
Tighten forcing screw until jaws contact connecting rod