1996 Johnson/Evinrude Outboards 25, 35 3-Cylinder Service Manual, Page 65Get this manual
5To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms6To test solenoid valve and seat:
Lightly pressurize inlet fitting with alcohol and syringe
With lever in run positionno fluid should enter inlet fitting With lever in prime positionfluid should come out both outlet fittings
[] 7To inspect or replace internal components, remove the four solenoid cover screws