1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 162Get this manual
ON OFF Switch ServiceAll Models Removal
1Remove screw retaining the switch and bracket
2Unsolder and remove two red wires from the switch (two brown wires, P.W.Mmodel)3Remove rubber boot from the switch
rn 4Remove nut retaining the switch to the bracketSave fiber washer and O-ringInstallation
5Reinstall fiber washer and O-ring on the new switch
6Place bracket on the switch
rn 7Install the nut and tighten securely
8Install the rubber boot
9Solder red (or brown) wires to the switch Route wires as shown on wiring diagram at the end of this section