1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 142Get this manual
17 0191 0195
10If the adjustment screw has been loosened or removed, readjust the screwRefer to Armature Shaft End Play Adjustment in this section 11Refer to Bench Tests in this section to test the reassembled motorInstallation
1Standard 12-Volt and 1224-Volt ModelsPlace new O-ring in motor grooveSlide heat shrink tubes over motor wire sAttach splices to the motor wiresAttach the motor tube and adapter wires to sp licesConnect motor RED wire to adapter RED wire and motor GREEN wire to motor tube BLACK wireCrimp and solder the splicesUse radiant heat sou rce to shrink the heat shrink tubes around the spli ces