1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 124Get this manual
Choke Coil ServiceP.W.MModels Removal
OJ 1Remove three screws retaining the motor assembly
2Cut two wires at choke coil-to-motor splicesRemove motor
3Pull choke coil to one side and cut wires at motor tube-to-choke coil splicesRemove choke coil4Remove adapter set screw5Clamp motor tube in V-jaw viseProtect the motor tube while clamping6Heat threaded area evenly with propane torch to soften thread locking compoundTo avoid injury, use insulated gloves when handling warm adapter housing