1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 123Get this manual
Installation 1Clean the threaded area of the motor tube using OMC Cleaning Solvent[] 2Standard ModelsInstall motor tube seal into adapterApply RTVadhesive sealant to top of seal[] 3Spray OMC All-Purpose Marine Cleaner on the motor tube wires to provide lubrication4Pull the motor tube wires through the motor tube5Temporarily attach motor to adapter
rn 6Apply OMC Ultra Lock to the threads of the motor tube7Tighten adapter on motor tube
8Align adapter set screw hole with existing dent in motor tube to set approximate motor alignment9Set motor offset using the Motor OffsetAll Models procedure in this section