1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 105Get this manual
6Turn motor straight ahead, and place cover on steering housing with direction indicator pointing straight ahead 7Tighten cover screws to 7-10 inIbs(0,8-1,1 Nm)
Install steering cable clamp and battery cable clamp in pedal base
9Thread pivot block onto the steering cable until it is centered on the cable threadsTemporarily insert the pivot block pin
Steering Cable AdjustmentHBF2
1Push toe end of pedal down all the wayNote how far the motor steers to the right (how much more than 180)Push heel end of pedal downNote how far motor turns to the left