1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 98Get this manual
6Install the retaining pin using suitable press
Be sure the electrical wires are not damaged by the retaining pin as it is pressed in place
7Apply OMC Screw Lock to the pinion set screwTighten screw (metric hex) to 25-35 inIbs(2,8-4,0 Nm)8Apply OMC Screw Lock to the adjustment ring set screw threadsHold the motor tube down and push the adjustment ring up to remove any looseness in bearingsTighten screws to 35-45 inIbs(4,0-5,1 Nm)9Remove three short brass colored screws from rack assemblySeparate rack cover, rack housing, and the rack