1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 65Get this manual
Continuity TestNegative Circuit, P.W.M Models To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuityConnect one meter lead to BLACK battery cableConnect second meter lead to BLACK and GREEN terminal in the foot pedal: The meter must show continuity If meter shows no continuity, repair or replace battery cables3Remove the steering housing cover"az::.Ci k
4Move first meter lead to BLACK and GREEN terminal in the oot pedal, and connect second lead to GREEN terminal in steering housing: The meter must show continuity If meter shows no continuity, repair or replace wiring harness between foot pedal and steering housing5Connect second meter lead to any bare metal part of adapter Meter must show continuity If meter shows no continuity, clean and tighten GREEN wire ground connection screws