1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 64Get this manual
Continuity TestNegat ive Circuit, Standard Foot Control, Except HBF2 Models INote To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect one meter lead to BLACK battery cable Leave this meter lead connected for all the following tests [JJ
3Connect second meter lead foot pedal terminal strip:
to BLACK 14-Galead at
The meter must show continuity If meter shows no continuity, repair or replace battery cables
rn 5Connect second meter lead to BLACK 14-Galead at steering housing terminal strip:
The meter must show continuity If meter shows no continuity, repair or replace wiring harness between foot pedal and steering housing6Remove indicator bulb from socketRemove motor from adapter housing Do not disconnect the motor leads at this timeCarefully, uncover wire splice on BLACK 14-Gamotor lead or connect second meter lead to pin that will pierce wire cover