1996 Johnson Evinrude "ED" Electric Outboards Service Manual, P/N 507119, Page 59Get this manual
[] 12Connect second meter lead to GREENWHITE 18-Galead at terminal "3" of speed control switchTurn speed control to speed and depress ONOFF switch: The meter must show continuity If meter shows no continuity, refer to Speed Control Switch, this sectionContinuity TestPositive Circuit, P.W.MModels
INote To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Remove steering housing cover2Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity
3Connect one metertest light lead to RED battery cable
4Connect second metertest light lead to RED 10-Gabattery cable terminal in the foot pedal: The meter must show continuity If meter shows no continuity, repair connection or replace battery cable